Automatic Shearing and Slitting Line | Combined Sheet Metal Cutting Machine

Product Description

The JACK-AIVA Automatic Shearing and Slitting Line combines coil unwinding, leveling, longitudinal slitting and cross-cutting in a workshop production arrangement. It prepares flat sheets and cut strips for small-batch fabrication.

The reference configuration accepts material up to 1250 mm wide. Shearing capacity is 0.2–1.6 mm thickness, while slitting capacity is 0.2–1.0 mm. These limits describe different operations and should be checked against the required material and finished size.

Production Process

Decoiling → Leveling → Slitting and cut-to-length processing → Run-out table

The line delivers cut sheets or strips. The documented configuration does not rewind slit material into coils.

Key Features

Technical Parameters

Slitting and Shearing Capacity

For jobs requiring both slitting and cross-cutting, the material must suit both operations. Specify the grade, thickness, slit widths and finished lengths when requesting a proposal. The listed line speed is a reference processing speed; finished-piece output also depends on cutting and handling cycles.

Machine Configuration

Decoiler

Supports coils with a maximum load of 6000 kg in the reference configuration.

Leveling device

Five parallel leveling rollers prepare the strip for downstream cutting.

Slitting and shearing unit

Slitting blades and the cutting blade use 6CrW2Si material. The line includes a hydraulic cutter.

Controls and run-out table

A PLC control cabinet manages operation; the run-out table receives finished pieces.

Applications

• Window-frame component preparation
• Water-tank sheet preparation
• Ridge and other sheet-metal accessory blanks
• Small-batch workshop sheet and strip cutting

Why Choose This Machine?

A combined line provides several preparation operations for workshops that need modest quantities of different sheet or strip sizes. Its defined processing limits help match the machine to the actual cutting job.

Information Required for Quotation

• Material grade and surface condition
• Coil width, thickness and maximum weight
• Required slit widths and strip count
• Finished cutting lengths and quantities
• Required dimensional tolerances
• Factory power supply and workshop layout

Send your material specification and production requirements to JACK-AIVA. Email: victor@customizedrollforming.com | WhatsApp: +86 18861673082

FAQ

Can this line recoil slit strips?

No. The documented configuration slits and cuts metal into lengths; it does not rewind strips into coils.

Are slitting and shearing thickness limits the same?

No. Shearing is listed at 0.2–1.6 mm, while slitting is listed at 0.2–1.0 mm.

What is the maximum processing width?

The reference maximum raw-material width is 1250 mm.

What is the line speed?

The reference speed is 15–20 m/min. Actual finished-piece output depends on the selected operations, cutting length and handling.

Can the line be customized?

Yes. Submit the material and cutting requirements so the appropriate configuration can be proposed.