Economical Leveling and Cut-to-Length Line | HCP Sheet Cutting Machine

Product Description

The JACK-AIVA Economical Leveling and Cut-to-Length Line converts metal coil into flat sheets for smaller production batches. It combines unwinding, leveling, guiding, length setting and shearing for workshops preparing sheet-metal blanks.

The reference HCP models process 0.5–1.2 mm material, with a minimum cutting length of 50 mm and a speed of up to 15 m/min. The HCP-1300 specification lists 400–1300 mm sheet width; the HCP-1600 specification lists 400–1500 mm. Model names should not be used in place of these documented width limits.

Production Process

Coil loading and decoiling → Leveling → Guiding and length measurement → Shearing → Sheet collection

Lamination and slitting are optional functions. Any arrangement for recoiling or additional processing should be specified in the technical proposal.

Key Features

Technical Parameters

Model Selection

Choose the machine according to the actual sheet width, material grade, thickness and required flatness. The source lists cold-rolled, hot-rolled, galvanized, prepainted, stainless, carbon and silicon steels as application materials; suitability must be checked for the selected model and material properties.

Machine Configuration

Feeding and decoiling

A feeding support and decoiler supply coil material to the processing section.

Leveling and guiding

Leveling, transport and guiding devices prepare the strip for length-controlled cutting.

Length control and shearing

The line provides automatic length control and cutting, with automatic or manual length settings.

Optional processing

A plastic-film lamination device and a slitting device may be specified separately.

Applications

• Automotive and agricultural vehicle sheet parts
• Container and appliance blanks
• Building-material sheet preparation
• General processing and packaging sheet components

Why Choose This Machine?

The economical configuration suits smaller production batches while retaining controlled length setting and cutting. Two documented models and optional processing devices allow the proposal to be matched to the workshop’s material and output needs.

Information Required for Quotation

• Material grade, coating and thickness
• Coil width, weight and inside diameter
• Minimum and maximum finished lengths
• Flatness and dimensional requirements
• Production quantities and target output
• Need for slitting or lamination
• Factory power supply and available space

Send your material specification and production requirements to JACK-AIVA. Email: victor@customizedrollforming.com | WhatsApp: +86 18861673082

FAQ

What is the shortest cutting length?

The reference specification lists a minimum cutting length of 50 mm for both models.

What is the width capacity of HCP-1600?

The supplied parameter table lists 400–1500 mm. Confirm this documented range when selecting the machine.

Are slitting and lamination included?

They are listed as optional items and should be specified in the quotation.

What tolerances are listed?

The reference table lists ±0.5 mm for length and ±0.8 mm for diagonal tolerance. Agree acceptance conditions for the actual material and sheet size.

Are the listed dimensions the complete line footprint?

They are listed as main machine dimensions. The full installation footprint depends on coil handling and optional equipment.