logo

45 mm Üç Bölmeli Bilyalı Çekmece Rayı Haddeleme Makinesi

Temel Özellikler

Menşe yeri:Çin
Marka Adı:JACK-AIVA

Ticaret Mülkleri

Asgari sipariş miktarı:1 TAKIM
Fiyat:Pazarlık edilebilir
Standart paketleme:Standart ihracat ambalajı
Teslim Zamanı:45-60 iş günü
Ödeme Şartları:L/C,T/T
Tedarik Yeteneği:AYDA 10 TAKIM
Özellikler
Ürün Adı: 45mm rulman çekmece slayt rulo şekillendirme makinesi Ürün Tipi: Çekmece kızağı ray şekillendirme ekipmanı
Slayt spesifikasyonu: 45 mm üç bölümlü bilyalı kızak Ray Profilleri: İç / Orta / Dış
Hammadde: Soğuk haddelenmiş çelik şerit Kalınlık Kombinasyonu A: 1,0 / 1,0 / 1,2 mm
Kalınlık Kombinasyonu B: 1,1 / 1,1 / 1,4 mm Kalınlık Kombinasyonu C: 1,2 / 1,2 / 1,5 mm
Kalınlık Sırası: İç / Orta / Dış Şekillendirme İstasyonları: 12 / 12 / 12
Rulo Malzemesi: CR12MOV Silindir sertliği: HRC 60–62
Mil MalzemesiŞaft MalzemesiŞaft MalzemesiŞaft MalzemesiŞaft MalzemesiŞaft MalzemesiŞaft MalzemesiSh: 45# Çelik Mil çapı: Ø52mm
Referans Şekillendirme Hızı: 12 m/dak Referans Ana Motor: 7,5 kW
Delme: Çevrimiçi hidrolik delme Kesme: Hidrolik Kesim
İsteğe bağlı yapılandırma: Servo tahrikli izleme kesici Güç Kaynağı: 380 V / 3 Faz / 50 Hz
Özelleştirme: Ray çizimlerine ve örneklerine göre
Vurgulamak

45mm bilyalı çekmece rayı makinesi

,

üç bölümlü teleskopik ray şekillendirme makinesi

,

Teleskopik Kanal Rulo Şekillendirme Makinesi

Ürün Tanımı

Ürün Açıklaması

45mm Bilyalı Rulman Çekmece Rayı Haddeleme Makinesi

The 45mm Bilyalı Rulman Çekmece Rayı Haddeleme Makinesi is designed to manufacture the steel rail profiles used in three-section telescopic drawer slides. The equipment covers iç ray, orta ray ve dış ray production, with forming tooling matched to each profile.

The production process integrates açma, haddeleme, düzeltme, çevrimiçi delme ve hidrolik kesme. Cold-rolled steel strip is progressively shaped into the required rail section and processed to the specified hole pattern and finished length.

The reference configuration uses her ray profili için 12 şekillendirme istasyonu, with Cr12MoV forming rollers hardened to HRC 60–62 and 45# çelikten yapılmış Ø52 mm şaftlar.

Rail dimensions, material thickness combinations, mounting holes and finished lengths are specified according to the customer’s drawings. The machine configuration can also be reviewed for rail profiles used in full-extension and soft-close drawer slide designs.


Üretim Süreci

Açma → Haddeleme → Düzeltme → Çevrimiçi Delme → Hidrolik Kesme → Bitmiş Ray Toplama

Cold-rolled steel strip is supplied from the decoiler and passes through the forming stations to create the required rail cross-section.

The straightening section adjusts the formed rail before the punching and cutting operations. Online tooling produces the specified holes, and the hydraulic cutting unit cuts the rail to the required length.

Inner, middle and outer rails use their respective forming and punching tooling. The completed rail components proceed to the finishing and assembly operations required by the drawer slide design.


Ana Özellikler

Özellik Açıklama
Ürün Tipi 45 mm üç bölümlü bilyalı rulman çekmece rayları
Ray Profilleri İç ray / Orta ray / Dış ray
Hammadde Soğuk haddelenmiş çelik şerit
Malzeme Kalınlığı 1.0 ila 1.5 mm arası belirtilen kombinasyonlar
Şekillendirme İstasyonları Her ray profili için 12 istasyon
Rulo Malzemesi Cr12MoV
Rulo Sertliği HRC 60–62
Mil Özellikleri Ø52 mm, 45# çelik
Düzeltme Entegre ray düzeltme bölümü
Delme Çevrimiçi hidrolik delme
Kesme Hidrolik kesme
Opsiyonel Kesme Yapılandırması Servo tahrikli takip kesici
Referans Şekillendirme Hızı 12 m/dak
Özelleştirme Ray çizimlerine ve üretim gereksinimlerine göre

Teknik Parametreler

Öğe Özellik
Makine Adı 45mm Bilyalı Rulman Çekmece Rayı Haddeleme Makinesi
Kızak Özellikleri 45 mm üç bölümlü bilyalı rulman kızağı
Ray Profilleri İç, orta ve dış raylar
Hammadde Soğuk haddelenmiş çelik şerit
İç Ray Kalınlığı 1.0 / 1.1 / 1.2 mm
Orta Ray Kalınlığı 1.0 / 1.1 / 1.2 mm
Dış Ray Kalınlığı 1.2 / 1.4 / 1.5 mm
Şekillendirme İstasyonları İç: 12 / Orta: 12 / Dış: 12
Şekillendirme Rulo Malzemesi Cr12MoV
Rulo Sertliği Isıl işlem sonrası HRC 60–62
Mil Malzemesi 45# çelik
Mil Çapı Ø52 mm
Referans Şekillendirme Hızı 12 m/dak
Referans Ana Motor Gücü 7.5 kW
Delme Sistemi Çevrimiçi hidrolik delme
Kesme Sistemi Hidrolik kesme
Takip Kesici Servo tahrikli konfigürasyon isteğe bağlı olarak mevcuttur
Güç Kaynağı 380 V / 3 Faz / 50 Hz
Ray Uzunluğu ve Delik Deseni Onaylanmış müşteri çizimlerine göre

The 12 m/min figure is a forming speed reference. Finished-piece output depends on rail length, punching requirements, cutting cycle and production conditions.


Ray Kalınlığı Kombinasyonları

Aşağıdaki kombinasyonlar referans ekipman belgelerinde belirtilmiştir:

Yapılandırma İç Ray Orta Ray Dış Ray
A 1.0 mm 1.0 mm 1.2 mm
B 1.1 mm 1.1 mm 1.4 mm
C 1.2 mm 1.2 mm 1.5 mm

The selected thickness combination must be matched to the approved rail profiles and tooling. Requirements for multiple thickness combinations should be confirmed when selecting the machine configuration.


İç Orta ve Dış Ray Üretimi

A three-section ball bearing drawer slide uses iç, orta ve dış raylar that work together as a telescopic assembly.

Each rail has a different cross-section and requires its own forming and punching tooling. The reference equipment specification provides her üç ray profili için 12 şekillendirme istasyonu.

The rail drawings should be reviewed as a matched set, including cross-section dimensions, mounting holes, end features and assembly clearances. This allows the tooling to be developed around the complete slide design.

Final sliding performance depends on the finished rails, bearings, cages, accessories and assembly quality.


Çevrimiçi Delme ve Hidrolik Kesme

The equipment integrates çevrimiçi hidrolik delme ve kesme to process the rail after forming and straightening.

Punching tooling is designed around the required mounting holes and other specified features. The cutting system produces rails to the agreed finished length.

A servo tahrikli takip kesici can be specified as an optional configuration. Its suitability is reviewed according to the required output, rail length and punching cycle.

Dimensional tolerances and inspection methods are agreed against the approved rail drawings.


Şekillendirme Ruloları ve Takımları

The forming rollers are made from Cr12MoV çelik and heat-treated to HRC 60–62.

CNC machining is used to produce the roller contours, while optical measurement supports inspection of the tooling geometry. The forming shafts use 52 mm çapında 45# çelik.

The roller profile, forming sequence and machine setup are matched to the selected rail cross-section and material thickness.


Makine Yapılandırması

Açıcı

Supports the steel coil and supplies strip to the forming section. Coil dimensions and loading requirements are confirmed for the selected configuration.

Ana Haddeleme Makinesi

Progressively shapes the steel strip into the required rail profile. The reference specification uses her iç, orta ve dış ray konfigürasyonu için 12 şekillendirme istasyonu.

Düzeltme Bölümü

Adjusts the formed rail before punching and cutting, supporting the straightness requirements of the finished component.

Hidrolik Delme Ünitesi

Produces the specified holes using tooling matched to the rail drawing.

Hidrolik Kesme Ünitesi

Cuts the processed rail to the required production length. Servo-driven tracking cutting is available as an optional configuration.

Elektrik Kontrol Sistemi

Coordinates the forming, punching and cutting operations according to the selected production setup.

Bitmiş Ray Toplama

Receives the completed rail components for subsequent handling, finishing and assembly.


Uygulamalar

The machine produces rail components for 45 mm ball bearing drawer slides used in:

  • Mobilya çekmeceleri
  • Ofis ve depolama dolapları
  • Yatak odası ve banyo dolapları
  • Takım kutuları ve tezgah çekmeceleri
  • Ekipman çekmeceleri ve depolama bölmeleri
  • Özelleştirilmiş teleskopik çekmece sistemleri

The finished slide’s load capacity, travel and service life are determined by the complete product design and testing.


Neden Bu Makineyi Seçmelisiniz?

Eşleşen Ray Profili Üretimi

The equipment can be configured for the inner, middle and outer profiles required by a 45 mm three-section drawer slide.

Entegre Şekillendirme ve İşleme

Roll forming, straightening, online punching and cutting are combined in one production flow, reducing transfers between separate operations.

Sertleştirilmiş Şekillendirme Takımları

Cr12MoV rollers with a specified hardness of HRC 60–62 provide the forming surfaces for the selected rail profiles.

Tanımlanmış Kalınlık Kombinasyonları

Three reference thickness combinations are available for review, allowing the machine specification to be matched to the customer’s slide design.

Opsiyonel Takip Kesme

A servo-driven tracking cutter can be included where appropriate for the required production conditions.

Özel Ray Çizimleri

Rail lengths, mounting holes and profile details can be reviewed according to customer drawings and samples.


Teklif İçin Gerekli Bilgiler

Please provide the following information so we can review your production requirements:

  • Complete cross-section drawings for the inner, middle and outer rails
  • Material grade, condition and surface requirements
  • Thickness of each rail
  • Required finished rail lengths
  • Hole patterns and end details
  • Dimensional and straightness tolerances
  • Finished slide samples, if available
  • Required output in rail pieces, slide sets or pairs per shift
  • Coil width, weight and inner diameter
  • Factory voltage, phase and frequency
  • Requirements for finishing and assembly equipment

Send your 45 mm drawer slide drawings and material specifications to request a machine configuration and quotation.


SSS

What profiles can this machine produce?

The equipment is designed for the 45 mm üç bölümlü bilyalı rulman çekmece raylarının iç, orta ve dış ray profilleri. Each profile requires its corresponding forming and punching tooling.

What material is used?

The main material specified is soğuk haddelenmiş çelik şerit. Material grade, hardness and surface condition should be confirmed against the rail drawing and forming requirements.

What thickness combinations are available?

The reference combinations, listed as inner / middle / outer rail, are:

  • 1.0 / 1.0 / 1.2 mm
  • 1.1 / 1.1 / 1.4 mm
  • 1.2 / 1.2 / 1.5 mm

The machine and tooling configuration must be matched to the selected combination.

How many forming stations are required?

The reference specification lists iç ray için 12 istasyon, orta ray için 12 ve dış ray için 12.

What is the production speed?

The reference forming speed is 12 m/dak. Actual finished-piece output depends on rail length, hole pattern, punching and cutting cycles, and the production schedule.

Is servo tracking cutting included?

Servo-driven tracking cutting is available as an opsiyonel konfigürasyon. The selected cutting arrangement is confirmed in the machine proposal.

Can the equipment produce rails for soft-close slides?

Rail profiles for soft-close designs can be reviewed according to customer drawings. Soft-close performance also requires the appropriate damping mechanism, accessories and final assembly.

Does this equipment produce fully assembled drawer slides?

The described configuration covers ray haddeleme, düzeltme, delme ve kesme. Ball cage production, bearing insertion, riveting and final slide assembly should be specified separately when a complete manufacturing solution is required.

İletişim Bilgileri
Jiangyin Jack-Aiva Machine Co., Ltd.

İlgili kişi: Mr. victor

Tel: 86-512 -58162333

Faksla.: 86-512-58162928

Sorgularınızı doğrudan bize gönderin.
(0/3000)