শেল্ভিং প্যানেল রোল তৈরির মেশিন
মৌলিক বৈশিষ্ট্য
বাণিজ্যিক সম্পত্তি
| স্টেশন গঠন: | 18টি স্টেশন | কাস্টমাইজেশন: | অনুমোদিত প্যানেল অঙ্কন অনুযায়ী |
|---|---|---|---|
| পণ্যের ধরন: | ইস্পাত তাক প্যানেল উত্পাদন লাইন | পাঞ্চিং মোড: | থামুন এবং ঘুষি |
| পাঞ্চিং মেশিন: | 63 টি | আবেদন: | স্টোরেজ শেভিং / ইন্ডাস্ট্রিয়াল শেল্ভিং |
| উপাদান পুরুত্ব: | 2-2.5 মিমি | পাঞ্চিং molds: | 1 সেট |
| খাদ উপাদান: | 45# নকল ইস্পাত | মোট শক্তি: | 30 কিলোওয়াট |
| কাজের গতি: | উল্লেখিত অবস্থার অধীনে 12 মি/মিনিট | ফলন শক্তি: | ≤260 MPa |
| পণ্যের নাম: | শেল্ফ প্যানেল রোল তৈরির মেশিন | উপাদান: | গ্যালভানাইজড ইস্পাত / অনুমোদিত কার্বন ইস্পাত |
| জলবাহী শক্তি: | 4 কিলোওয়াট | কাটিয়া মোড: | স্বয়ংক্রিয় কাট থেকে দৈর্ঘ্য |
| ভোল্টেজ: | 380 V / 3 ফেজ / 50 Hz | ||
| বিশেষভাবে তুলে ধরা | শেল্ফ প্যানেল রোল তৈরির মেশিন,শেল্ভিং প্যানেল রোল তৈরির মেশিন,স্টোরেজ র্যাক রোল ফর্মিং মেশিন |
||
পণ্যের বিবরণ
শেল্ফ প্যানেল রোল ফর্মিং মেশিন
The শেল্ফ প্যানেল রোল ফর্মিং মেশিন স্টোরেজ এবং শেল্ভিং সিস্টেমের জন্য স্টিলের শেল্ফ প্যানেল তৈরি করার জন্য ডিজাইন করা হয়েছে। এটি প্রয়োজনীয় শেল্ফ ডিজাইন অনুযায়ী প্যানেল তৈরি করতে সাইড পাঞ্চিং, রোল ফর্মিং, কাটিং এবং বেন্ডিংয়ের মাধ্যমে স্টিল কয়েল প্রক্রিয়া করে।
The production line consists of a ডিকয়লার, একটি সেট ছাঁচ সহ ৬৩টি পাঞ্চিং মেশিন, ১৮-স্টেশন রোল ফর্মিং মেশিন, কাটিং সরঞ্জাম, হাইড্রোলিক সিস্টেম এবং কন্ট্রোল সিস্টেম.
The reference configuration processes ২-২.৫ মিমি গ্যালভানাইজড স্টিল বা অনুমোদিত কার্বন স্টিল, with material yield strength of up to ২৬০ এমপিএ. Panel dimensions, punching details and finished lengths are reviewed according to customer drawings.
উৎপাদন প্রক্রিয়া
ডিকয়লিং → সাইড পাঞ্চিং → রোল ফর্মিং → কাট-টু-লেন্থ → বেন্ডিং এবং ট্রিম্মিং → ফিনিশড প্রোডাক্ট কালেকশন
Steel strip is fed from the coil into the punching unit, where the required side features are produced before roll forming.
The strip then passes through 18 forming stations to create the shelf panel profile. The formed panel is cut to length and undergoes the specified bending and trimming operations before collection.
The final arrangement of punching, bending, trimming and product handling is confirmed against the approved panel drawing.
মূল বৈশিষ্ট্য
| বৈশিষ্ট্য | বিবরণ |
|---|---|
| পণ্য | স্টিলের শেল্ফ প্যানেল |
| প্রয়োগ | স্টোরেজ শেল্ভিং এবং র্যাক শেল্ফ প্যানেল |
| উপযুক্ত উপাদান | গ্যালভানাইজড স্টিল / অনুমোদিত কার্বন স্টিল |
| উপাদানের পুরুত্ব | ২-২.৫ মিমি |
| উপাদানের ফলন শক্তি | ≤২৬০ এমপিএ |
| পাঞ্চিং সিস্টেম | একটি সেট ছাঁচ সহ ৬৩টি পাঞ্চিং মেশিন |
| পাঞ্চিং মোড | থামুন এবং পাঞ্চ করুন |
| ফর্মিং স্টেশন | ১৮টি স্টেশন |
| কাটিং | স্বয়ংক্রিয় কাট-টু-লেন্থ |
| প্যানেল ফিনিশিং | প্যানেলের নকশা অনুযায়ী বেন্ডিং এবং ট্রিম্মিং |
| রেফারেন্স ওয়ার্কিং স্পিড | ১২ মিটার/মিনিট (নির্দিষ্ট দৈর্ঘ্যের শর্তে) |
| মোট শক্তি | ৩০ কিলোওয়াট |
| হাইড্রোলিক স্টেশনের শক্তি | ৪ কিলোওয়াট |
| কাস্টমাইজেশন | অনুমোদিত অঙ্কন অনুযায়ী প্যানেলের মাত্রা এবং বৈশিষ্ট্য |
Specified working speed: 12 m/min, including punching and cutting when the finished length is at least 6 m. Output for other panel lengths and hole patterns is confirmed against the actual product.
প্রযুক্তিগত পরামিতি
| আইটেম | স্পেসিফিকেশন |
|---|---|
| মেশিনের নাম | শেল্ফ প্যানেল রোল ফর্মিং মেশিন |
| ফিনিশড প্রোডাক্ট | স্টিলের শেল্ফ প্যানেল |
| উপযুক্ত উপাদান | গ্যালভানাইজড স্টিল / অনুমোদিত কার্বন স্টিল |
| উপাদানের পুরুত্ব | ২-২.৫ মিমি |
| উপাদানের ফলন শক্তি | ≤২৬০ এমপিএ |
| পাঞ্চিং মেশিন | ৬৩টি |
| পাঞ্চিং মোল্ড | ১ সেট |
| পাঞ্চিং মোড | থামুন এবং পাঞ্চ করুন |
| ফর্মিং স্টেশন | ১৮টি স্টেশন |
| প্রধান শ্যাফটের উপাদান | ৪৫# ফোর্জড স্টিল |
| রেফারেন্স ওয়ার্কিং স্পিড | ১২ মিটার/মিনিট |
| স্পিডের শর্ত | পাঞ্চিং এবং কাটিং সহ, ফিনিশড দৈর্ঘ্য ≥৬ মিটার |
| কাটিং মোড | স্বয়ংক্রিয় কাট-টু-লেন্থ |
| মোট শক্তি | ৩০ কিলোওয়াট |
| হাইড্রোলিক স্টেশনের শক্তি | ৪ কিলোওয়াট |
| স্ট্যান্ডার্ড পাওয়ার সাপ্লাই | ৩৮০ ভোল্ট / ৩ ফেজ / ৫০ হার্জ |
| বিকল্প পাওয়ার সাপ্লাই | ক্রেতার প্রয়োজনীয়তা অনুযায়ী |
| প্যানেলের মাত্রা | অনুমোদিত গ্রাহকের অঙ্কন অনুযায়ী |
Final specifications are subject to the confirmed panel profile, material and production line configuration.
৬৩টি স্টপ-এন্ড-পাঞ্চ সিস্টেম
The reference production line includes a একটি সেট ছাঁচ সহ ৬৩টি পাঞ্চিং মেশিন. Its specified operating method is থামুন এবং পাঞ্চ করুন.
পাঞ্চিং is carried out before roll forming to create the side features required by the shelf panel design. Hole or slot dimensions, positions and spacing are confirmed from the customer’s drawings before the moulds are made.
The supplied documents do not specify punching accuracy or a servo punching model. These details should be confirmed separately when required for a project.
স্টোরেজ সিস্টেমের জন্য স্টিলের শেল্ফ প্যানেল
Steel shelf panels form the supporting surface of a shelving level. Their dimensions and edge details must match the surrounding shelf structure and the intended method of assembly.
The line can be configured around the customer’s panel drawing, including profile shape, side features and finished size. Panel width requirements should be reviewed with the tooling design.
The load capacity of a completed shelf depends on the full shelving structure, including panel design, material thickness, supports, connections and span. It should be established for the finished shelving system.
মেশিন কনফিগারেশন
ডিকয়লার
Supports the steel coil and feeds strip into the production line. Coil size and loading requirements are confirmed for the selected machine configuration.
৬৩টি পাঞ্চিং মেশিন
Produces the specified side features before roll forming. The reference configuration includes one set of punching moulds and uses a stop-and-punch method.
প্রধান রোল ফর্মিং মেশিন
The ১৮-স্টেশন ফর্মিং সিস্টেম progressively shapes the punched steel strip into the required shelf panel profile.
স্বয়ংক্রিয় কাটিং সিস্টেম
Cuts the formed panel to the specified length under automatic control.
বেন্ডিং এবং ট্রিম্মিং সরঞ্জাম
Completes the bending and trimming operations required by the approved shelf panel design.
হাইড্রোলিক সিস্টেম
A ৪ কিলোওয়াট হাইড্রোলিক স্টেশন supplies power for the line’s hydraulic operations.
কন্ট্রোল সিস্টেম
Coordinates the production operations and automatic cut-to-length settings.
ফিনিশড প্রোডাক্ট কালেকশন
Receives the completed panels after processing. The final collection or stacking arrangement is confirmed according to the production layout.
প্রয়োগ
The machine is suitable for producing steel panels used in:
Warehouse storage shelving, industrial shelving, stockroom shelves, workshop shelving and customized storage shelf systems.
The exact panel profile and connection details are determined by the customer’s shelving design.
এই মেশিনটি কেন বেছে নেবেন?
সমন্বিত প্যানেল উৎপাদন
Punching, roll forming, cutting and bending are brought together in one production flow, reducing transfers between separate processing steps.
৬৩টি পাঞ্চিং ক্ষমতা
The reference line includes a 63T punching machine and one set of moulds for the specified panel features.
১৮ স্টেশন রোল ফর্মিং
The steel strip is progressively shaped through 18 forming stations to produce the required shelf panel profile.
সংজ্ঞায়িত উপাদানের পরিসীমা
The supplied configuration is specified for ২-২.৫ মিমি স্টিল উইথ ইয়েল্ড স্ট্রেংথ আপ টু ২৬০ এমপিএ.
স্বয়ংক্রিয় দৈর্ঘ্য অনুযায়ী কাটা
The cutting system produces panels to the set length. Available lengths and tolerances are confirmed for the approved design.
অঙ্কন ভিত্তিক কনফিগারেশন
Panel shape, side features and dimensions can be reviewed according to the customer’s drawings and production requirements.
উদ্ধৃতির জন্য প্রয়োজনীয় তথ্য
Please provide the following information so the machine configuration can be reviewed:
- Shelf panel drawing with all dimensions
- Material grade and coating
- Material thickness and yield strength
- Side hole or slot pattern
- Required panel widths and lengths
- Bending and edge details
- Required production capacity
- Coil width, weight and inner diameter
- Factory voltage, phase and frequency
- Finished product collection or stacking requirements
Send your shelf panel drawing and material specification to request a machine proposal and quotation.
প্রায়শই জিজ্ঞাসিত প্রশ্নাবলী
এই মেশিনটি কী পণ্য তৈরি করতে পারে?
The line is designed to produce স্টোরেজ শেল্ভিং সিস্টেমের জন্য স্টিলের শেল্ফ প্যানেল. Final panel dimensions and features are based on the approved customer drawing.
মেশিনটি কী পুরুত্বের উপাদান প্রক্রিয়া করতে পারে?
The reference configuration is specified for ২-২.৫ মিমি স্টিল with material yield strength of up to ২৬০ এমপিএ.
Does the line include punching?
Yes. It includes a একটি সেট ছাঁচ সহ ৬৩টি পাঞ্চিং মেশিন. The specified punching method is stop and punch.
মেশিনটিতে কয়টি ফর্মিং স্টেশন আছে?
The reference configuration has ১৮টি রোল ফর্মিং স্টেশন.
What is the production speed?
The stated 12 m/min speed includes punching and cutting for finished lengths of at least 6 m. Other lengths and punching patterns require production trials.
Can the panel width be changed?
The supplied documents state that shelf panel width can be adjusted, but do not specify the adjustment method or range. Please provide the required widths so the tooling configuration can be confirmed.
Can the power supply be customized?
Yes. The reference power supply is ৩৮০ ভোল্ট / ৩ ফেজ / ৫০ হার্জ. Other electrical specifications can be discussed according to buyer requirements.
যোগাযোগ ব্যক্তি: Mr. victor
টেলিফোন: 86-512 -58162333
ফ্যাক্স: 86-512-58162928